Home > Garage Door Insulation > Fiberglass R-9.0 >

2-car Garage Door Residential Insulation Kit, R-9 Value
2-car Garage Door Residential Insulation Kit, R-9 Value


 
Alternative Views:


List Price: $259.98
Our Price: $209.00


Availability: Usually Ships in 2 to 3 Days
Product Code: AP-KGD-2
Qty:

Description
 
Garage Door Insulation Kit Installation Video:

Features
  • 2-car Garage Door Fiberglass Residential Insulation Kit, R-9:

    Includes (2) kits to fit a two car garage residential door, from 16' to 18' wide by 7' high.
    Dimensions: Each Kit includes 1-roll of material, 21"H x 36'W
    Weight: 14-lbs. per roll
    Enough material to insulate a 16'W to 18'W x 7'H residential 2-car garage door
    Also includes (12) retainer clips
    Additional retainer clips and insulation rolls sold separately
    Kits available for 1-car garage doors, 2-car garage doors and 3-car garage doors

Average Rating: 5 of 5 Total Reviews: 7 Write a review »

  0 of 0 people found the following review helpful:
 
Seems like a very nice product and went up easy February 14, 2018
Reviewer: Donald Nelson from Atlanta, GA United States  
The install is straight forward and as simply as a DIY project gets. I came home found it delivered at my door and then took less than an hour to install.

I purchased the 2 car garage kit and each kit came with 6 retaining clips for a total of 12. But I need 12 more clips to finish my garage door. But they do hold on their own without the clips and its merely for aesthetic reasons. I will be purchasing the remaining 12 clips.

So far so good and the temps have been mild so I don't really have a review of performance but I imagine it is fine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Awsome! February 7, 2018
Reviewer: Howard Van Dine from Tuscaloosa, AL United States  
Ordered 9/17, received conf # 9/18, order on 9/21, installed 9/23 in 1.5hrs. Had a 30"x8' piece of plywood on saw horses w/ 2-12" clamps on one end to keep the roll from going off onto the floor. Pulled one end to meet the other end of plywood. Used scrap piece of plywood under the insulation where I make may cuts. Width already to spec for my door. Measured length, used 2 more clamps to hold a square in place & used a box cutter to make the cut. Fed the top edge into the door section, sliding one end into the channel side, fit the remaining top/bottom edges into section channel, patting material into place. Used the plastic end pieces, more for looks than to keep the material in place. Lightly patted material 5"-6" from end to "puff" the insulation edges flush with the plastic end piece. VOILA!!  Done and looking great!  Stays in place! No strain on the garage door opener(18' wide door)! Door is much, much quieter when opening/closing!  One happy camper!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Easy install, garage is warmer January 17, 2018
Reviewer: Anonymous Person from Dallas, TX United States  
Video about installation is correct.  This is pretty easy.  It took me a little over an hour to install on my two car garage door.  The garage is now about 15° warmer (it's winter now) than it was before the insulation.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent December 4, 2017
Reviewer: Anonymous Person  
Super fast delivery. Completed a 12 panel 16'x7' in an hour and a half. Quality product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Best Product! November 21, 2017
Reviewer: Bob & Karen from Wheaton, IL United States  
This is THE BEST garage door insulation product!  I did much research before purchasing.  Loved how easy this was to install.  It looks very nice.  Stays in place! and with a R9 insulation value the highest on the market for garage doors.  I would highly recommend this garage door insulation!

Was this review helpful to you?

View All Customer Reviews