|
| |
Fiberglass Garage Door
Insulation
Kits for Residential and
Commercial Doors
Texas
Garages® offers the
Highest "R" Value Fiberglass Anco Garage Insulation Kits on the Market,
in a cost effective, easy to install product. Our Recycled Fiberglass Product, manufactured from 100%
recycled content is resistant to corrosion, does not promote mold,
bacteria or fungi growth and is indoor air quality certified and 100%
Formaldehyde FREE! This
product is safer and more comfortable to install than other fiberglass
products because the longer fibers are less likely to cause irritating
itching associated with the rotary spun fiberglass. Also, these kits do not require
special tape or clips to be held in place, insulation is held in place
with the rigid re-enforced mesh vinyl facer. You can install this
product on a standard size residential 16-foot wide garage door in under
an hour!
Follow the easy to install instructions below and enjoy your insulated Garage
Today!
Our Fiberglass product is also Fire Rated
and is Flame Retardant. Both the Vinyl Facing and the Fiberglass
carry a Flame and Smoke Spread Rating of 25/50 respectively when tested in
accordance with ASTM E 84 or the Underwriters Laboratories flame spread
test method. Fiberglass will not flame up and if hot enough will
only smolder.
Recently Installed
Customer Photos
NOTE:
These Garage Door Insulation Kits are designed to go on standard size
Residential and Commercial Metal Doors that have panelized extruded frame
edges. These kits are not designed to fit flush horizontal panelized
fiberglass or wood doors.
Watch the
YouTube Video Below:
Energy Tax Credits
Energy Tax Credits have been extended
through 2013 under the American Taxpayer Relief Act of 2012, which was passed by
Congress on January 1, 2013 and signed into law on January 2, 2013 by President
Obama. Tax Credits are 10% of the product cost only, not installation
labor, up to a maximum of $500. This Tax Credit expires December 31, 2013
and must be purchased and installed in an existing home that is your principal
residence, new construction and rentals do not qualify. Consult your tax
professional for additional information.
Tax Certificate
Click to Download
Residential Garage Door Insulation
Kits
Contact us to place discounted orders.
|
 |
$89.00kit
Regularly $119.95 |
|
Each Kit Includes:
(1) Roll 36.5-feet Wide x 21" High x 2" Thick,
(6) Plastic Retainer Clips, you will need to
determine exactly how many you need.
Additional
Plastic Retainer Clips
sold separately below.
Each Kit Weighs 11-lbs.
Provides R-9 Insulation Value!
(1) Kit fits a standard residential
8' or 9' Wide by 7'
High 8-panel Door
(2) Kits
fit a standard residential
16' or 18' Wide by 7' High 16-panel Door |
Commercial Garage Door Insulation
Kits
|
|
$169.00kit
Regularly $199.95 |
|
Each Kit Includes:
(1) Roll 61-feet Wide x 24" High x 2" Thick
Provides R-9 Insulation Value!
(1) Kit fits a standard commercial
10' Wide by 12' High 18-panel Door
Each Kit Weighs 26-lbs.
NOTE: Optional
Plastic Retainer Clips
sold separately below. |
Individual Components
Purchase individual Residential and Commercial
Rolls as well as Plastic Retainer Clips.
|
Residential Door Rolls
10' Wide x 21" High x 2" Thick
Provides R-9 Insulation Value!
Each Roll Weighs 4-lbs.
|
|
$24.50roll
Regularly $32.95 |
|
Commercial Door Rolls
10' Wide x 24" High x 2" Thick
Provides R-9 Insulation Value!
Each Roll Weighs 5-lbs.
|
|
$27.50roll
Regularly $35.95 |
|
|
Residential Plastic
Retainer Clips
Sold Individually, 20-3/8" Long
Used to keep insulation vertical edges
tucked in door panel.
|
|
$1.50 each
Regularly $1.99 |
|
Commercial Plastic
Retainer Clips
Sold Individually, 23-3/8" Long
Used to keep insulation vertical edges
tucked in door panel.
|
|
$1.75 each
Regularly $2.29 |
|
Installation Instructions
|
Measure
Measure the length
and width of the
garage door panel
inside dimensions. |
Cut
Using a utility
knife cut the insulation to
the dimensions to
fill the inside panel cavity.
Use a mask and gloves for protection |
|
Install
Simply tuck the
insulation you measured into
the inside frame
grooves of each panel. |
Enjoy
Your garage door
now looks great and you will
save energy and
outdoor noise will be reduced! |
Recent customer comments:
"We recently purchased two of the recycled R-9 Garage Door insulation
kits.
Ready - they worked great! Our garage here in Florida now stays fairly
constant inside without feeling the sun's heat coming through the doors even up
to a couple of feet from the door inside. They also are now very quiet
when opening and closing. The installation is very simple and professional
looking with the clip on strips...."
Duane P., FL
"I installed the recycled R-9 Garage Door insulation kits on my double door and
it was a breeze. I did it in no time and it was very simple and straight
forward. I had no miss cuts or difficult tasks, just measure, cut and
install. I have hurricane braces on my door and was able to slide the
material behind the braces without taking them off. I am very pleased with
the results and highly recommend this product!"
Denny G., FL
"Thank you! You have a great
company and, should the need arise, I look forward to doing business with your
company in the future." Michael
B., CA
"Thanks again, and btw, THIS IS
A GREAT PRODUCT! I read VERY unflattering reviews of the J****-M*******
& O**** C******... and was very impressed by how easily your kits were installed
(I did an 8' x 16', an 8' x 18' and a portion of an 8' x 9' door all yesterday,
and I didn't attempt to break any speed records doing so. Being that I
live in Florida, with their hurricane rated doors with all the additional
bracing, there were many more cuts than an average door, and the bracing serves
to help hold the insulation material in place very well."
Randy F., FL
"...I am well pleased with
your product. I was able to trim it out around my windows using only my
cutter and white tape... the temperature in my garage is now staying 54-56
degrees, with outside temperatures at 32-35 degrees and 2 sides of my garage are
to the outside.
You have a great product!" Randy
S., FL
"I installed my garage door insulation over the weekend and the install
went great, thanks for supplying me a good product. I already have handed
out your contact information to several neighbors."
John Y., TX
"We recently installed your garage door insulation kit for our garage
door. We are very pleased with the product, ease of installation and
cooler garage. It is nice to find a product that meets the advertised
specifications. I am recommending it to all my neighbors."
T. Smith, TX
"I'm seriously impressed with your fiberglass garage door insulation
kit. It was simple to install and it has made a huge difference in the
temperature in my garage. My only regret is that I didn't install this
years ago. . . It has made me a believer! Thank you so much."
Greg M., FL
"The product is everything you advertised and I will keep you in mind
for future needs and recommendations to friends and family."
Doug T., TX
|
NOTE:
|
Failure to install
Garage Door Insulation Kits per instructions will VOID warranty.
Please
contact us if you
have any questions prior to installation. We are here to Help! |
1. Question:
"Are the fiberglass garage door insulation kits formaldehyde free?
Even though they are rated indoor air quality certified does that mean they are
completely formaldehyde free?"
Answer: Yes.
Our Fiberglass Garage Door insulation kits are 100% Formaldehyde Free and 100%
recycled content.
2. Question:
"Will the additional weight of the fiberglass garage door insulation kits
require the garage door springs to be adjusted?"
Answer:
Maybe. Each kit adds approximately 11-lbs. to the door. Depending on
the quality, age and maintenance of your springs will determine if you need to
do anything to your springs. Generally you will not have to do anything to
your springs but keep in mind it is possible you may need to have the springs
professionally adjusted.
3. Question:
"How are the retainer clips used, I can't see how to attach them to anything?"
Answer: The
retainer clips are used to cover the exposed vertical edges of the fiberglass
insulation and hold the material flush with the outside frame edge of the door
to give the installation a professionally finished look. The retainer
clips are placed inside the top and bottom horizontal frame edges of the door
panel where there is no cavity to tuck the fiberglass insulation into. The
fiberglass insulation pushes outward on the retainer clip causing a "friction
fit" and the retainer clips basically hold themselves in place.
|
Click the "LINKS" below to shop
our other Online Store Products: |
|
 
|
